jamie_62belair
New member
hi is there any issues running your control arm/coilover kit with drop spindls?i have the 12 inch rotor d52 caliper with one piece style drop spindle.thanks.
coilover conversion kit 58-64 full size chev
- Thread starter jamie_62belair
- Start date
There's not an issue assuming you want to drop the car quite a bit. You didn't say what car you have, but the majority of our coil overs lower the vehicle 1” with the ability to lower it even more. So you’ll be lowering your vehicle 3-4 inches using drop spindles. The exceptions would be 1962-67 Nova/Chevy II, 1964-70 Mustangs and our MII IFS kits. Those do start at stock height.
jamie_62belair
New member
hi,for a 62 chev bel air,yes im wanting to lower alot,thanks
Glade to help Jamie, seems like you're on the right track. Hit us up if you need anything else.
Glad to help Jamie, seems like you're on the right track. Hit us up if you need anything else.